 Top Notch HP Oriented Strand Board Flooring: With its exclusive vertical notching system in the tongue profile and the end of every panel, Top Notch quickly siphons off standing water before it can damage the subflooring.
Standing water rolls off the flat panels through 1/8-inch crevices between them, falling harmlessly to the ground.
In addition, the edges of every Top Notch panel are treated with an advanced coating that boosts their resistance to water absorption.
BarrierFloor HP Oriented Strand Board Flooring: In addition to the moisture protection and the 90-day no-sand guarantee, LP's newest OSB flooring product incorporates SmartGuard™.
This patented zinc borate additive renders the wood free of termites, wood rotand fungal decay.
 Oriented Strand Board Sheathing: Designed for walls and roofs, this product uses an Advanced ACI® edge-coating to minimize water absorption that can distort the board's dimensions.
Pre-marked nailing lines make LP OSB Sheathing easier to install than plywood. Its skid-resistant surface is 100% top-sanded to reduce flaking.
 Finger-Jointed Studs: Used for vertical framing, these are made from short-length, stud-grade lumber processed to remove defects.
Each stud consists of a minimum of two finger joints connected with a water-resistant adhesive.
The finger-joint assembly renders the studs more dimensionally stable than conventional solid sawn studs, as well as resistant to warping and twisting.
 LPI® Joists: Used to support floors and ceilings, these joists feature OSB webs and solid sawn or laminated veneer lumber (LVL) flanges.
LPI® Joists are light to handle, easy to install and typically have greater load-carrying capacity than traditional lumber.
Solid Start® Rim Board: A new product, designed specifically for use with LPI Joists, makes it easier for builders to cap off an LP floor-support system.
Made of a thick, high-grade OSB, Solid Start Rim Board provides high-capacity support to vertical and lateral wall loads.
Gang-Lam® LVL: Produced by combining exterior adhesives and ultrasonically graded veneers, these high-capacity beams offer superior strength and dimensional consistency compared with solid sawn lumber.
 SmartSide Engineered Wood Siding: This wood-composite lap siding looks better, installs easier and offers better warranty protection than fiber-cement.
SmartSide features a durable core, a natural-looking texture and a paint-ready, pre-primed overlay.
 ColorSide Pre-Finished Siding: With nine colors and accessories to match, this hardboard system is a premium alternative to unfinished and vinyl siding.
Design versatility also is enhanced through a host of matching color accessories, including two-piece outside corner bases and caps, inside corners, J-trim, starter strip, matching color nails, caulk, joint moulding and even touch-up paint.
 SmartGuard Protection: Two years ago, LP introduced a safe, cost-effective process to help its wood-composite products resist the debilitating effects of termites and fungal decay.
The SmartGuard process entails mixing zinc borate, a naturally occurring compound, into the blending process for each product, protecting it against infestation.
 Maxim Vinyl Siding: Available in an expanding palette of up to 12 colors, Maxim's cedar-grain finish offers a wide range of color-matched accessories and trims.
Its positive, snap-together assembly ensures quick and proper assembly, saving time and money.
 TimberCrest Vinyl Siding: Available in an expanding palette of up to eight colors, TimberCrest's cedar-grain finish offers a wide range of color-matched accessories and trims.
Its positive, snap-together assembly ensures quick and proper assembly, saving time and money.
 WeatherBest Decking: WeatherBest offers the look and feel of natural hardwood without the costly, time-consuming hassles of regular maintenance.
WeatherBest is made from wood-flour particles coated in polyethylene and mixed with additives that protect its surfaces from the sun, wind, moisture, even termites.
 Cedar Decking: Engineered for the decking market, Evans Plus western red cedar is a superb combination of beauty and durability.
This tightly knotted decking has a smooth, skip-free facing that makes it an ideal decking surface.
 TechShield Radiant Barrier Sheathing: TechShield is the industry's first patented laminated radiant barrier roof sheathing.
Installed just like standard roof decking, TechShield is designed to reduce heat gain through the top of the house and, as a result, cooling costs for the entire structure.
 Cocoon Insulation: Composed of 100%-recycled cellulose fibers, mainly newsprint, Cocoon has up to three times the density of fiberglass and therefore a proportionately higher R-value per square inch.
The Cocoon Wall Spray System uses minimal moisture, as well as a starch-based binder that helps the material set without settling.
 Prestige Pre-Finished Mouldings: These mouldings are unique, polystyrene interior architectural moulding "concept" products.
The moulding offers the rich, carved detailing of expensive architectural wood mouldings, but with greater durability at a more affordable price.
|
